How to use the vacuum pump

Many people were thinking about the growth of the penis, but the methods they knew were a bit scared.In medicine, there is a tool like a vacuum pump.

It is used for male genital genitals to maintain the size of the penis.

How does the pump work

The principle of operation is quite simple.Vacuum around the penis occurs with poor pressure, which causes stimulation of blood circulation.As a result, the cave tissue is full of blood, resulting in rapid growth and hardening of the penis.A similar phenomenon in medicine is called hyperemia.

During the erection, the tissue of the penis is poured with blood and swollen heavily.The vacuum pump stimulates the vessels and allows the size of the member to maintain 30-60 minutes.In addition, this device can be used instead of massage.

The pressure in the flask expands the thick bodies, significantly increasing the bloodstream and the size of the penis.After the pump, the member looks much more spectacular than with the usual excitement.

Do not use the vacuum pump while in use.The genitals will not be as it should, but bleeding, bruises and other complications can occur!

Varieties

All vacuum pumps have similar designs and does not take into account the principle of action.The vessel in which the male organ is located is a plastic flask with division.With it, the set has a nozzle and a pear that pumps the pressure inside the flask.

There are tools that have additional tools: pressure setting buttons, manometers, valves for reset.

The hand air is pumped and removed with a pear or piston.Their application is good in the sense that they are available to anyone who wants to increase the genitals.

In automatic vacuum, it is created with the electric pump on the battery.The pressure can be observed on a mounted pressure gauge and some samples should be fitted with a button for the absorption force.

Water devices are a more moderate option for men's penis growth.The basic principle of their operation is based on the fact that the flask is pumped with a pump instead of air.The hydraulic foam has more efficiency and has a longer life.

How to choose a pump?

The device is selected according to two criteria: the genitals and a given task.

• The length of the ship should be at least 2-3 cm larger than the penis in excited state;
• The diameter of the flask should be selected by 1-2 cm as the male member diameter during erection;
• For those who do this for the first time, experts suggest that with hand splendor, where the breath is done by pears.

It is better to buy a device with a transparent flask to track the process and pay attention to the strength of the material from which it is made.

Benefits and disadvantages

Men's vacuum pump not only increases the size of the penis, but also has therapeutic effect.If you use it continuously, the amount of male genitalia increases over time and erection will remain much longer during sexual intercourse.This is due to a decrease in organ sensitivity.

In fact, male dignity increases not only in its length but also in its width.

In addition, you can adjust the shape of the male organ due to vacuum, especially if you have curvature.Inside the pump, the penis is kept evenly from the edges of the walls to compensate.

Consequences of inadequate use:

• Due to capillary violations, specific spots occur on the penis skin;
• reduction of ejaculation or erection;
• numbness.

Effectiveness in the case of use

After continuous use, the penis shape and size will be unchanged after six months.The result will be much more effective if you are taking drugs that increase male hormones at this time.

After the pump, the tag became 3 cm longer, 6 months for one year.The thickness of dignity increased to 2 cm.

Instructions for use

If the vacuum pump is first used, the process should not be held for 5 minutes to avoid unpleasant consequences.Improper use can lead to certain features and edema disorders.

To avoid this should be followed by the following recommendations

• First, the air should be pumped out of the unit, which improves the circulation of the penis bloodstream.Previously, care should be taken to lubricate the penis.
• One of the penis growth should not last for more than 20 minutes.
• You need to start the air to reduce the pressure inside the board.To do this, just press the special valve located near the pear.In some models, there is a small hole for these purposes, which is covered with finger during the procedure.

• Once the member has reached the maximum hardness, you must put a ring on its base, which provides an overgrown organ and holds an erection.
• If a pump with a hydraulic pump, a relaxing bath should be prepared with hot water before the procedure.After 8 minutes, the dignity must be placed in a vacuum vessel.The ring should fit tightly into the scrotum, thereby reducing the pressure in this area.The device is placed in such a way that the distance from the penis to the walls of the flask is the same from all sides.It is important to do this before starting the moment of suction.Observing these instructions can avoid injuries.
• To develop a vacuum environment, experts advise to perform more oscillation movements.The excess water then uses a trigger.Occasionally, the pump must be pressed several times to complete excess liquid leaves.
• You can relax a little after the water and then continue the procedure.If the pressure decreases, it should be pumped to the desired level.

Male benefits can be increased by a series of special exercises, but all recommendations for using the device must be followed.

During the first week, the procedure is performed once a day for 10 minutes.

In the second week, in 15, the third in 10 minutes twice a day.

The fourth - twice a day, 15, 20 minutes in the morning and 10 evening.

Potential consequences

Incorrect use of the device often occurs.

• Due to the lymphatic stagnation, a swollen ring appears around the penis head.Occasionally, this problem may also arise with proper use.In such cases, it is better to stop the procedure for a while.
• As a result of prolonged manipulations or low pressure of the vessel, a huge flow of lymphatic occurs, forming swelling.
• Erection deterioration is the most common consequence.
• In case of heavy loads, the color of the skin may occur.Due to severe discharge, bleeding often occurs, which can be irreversible.
• The blood vessels are the rarest problem, but it is dangerous, so it is better to postpone the business to increase the penis.

Contraindications

The duration of the vacuum environment is determined by the extension of the cells.In addition to all recommendations for the use of the device, a pulse effect is created within the ship.Increasing negative pressure, which causes numbness and one does not feel pain.

The maximum volume of vacuum should not cause pain, but for up to 18 seconds.Daily vacuum manipulations should not exceed 45 minutes.

The member's penis has the following contraindications:

• Diabetes mellitus;
• sexually transmitted diseases;
• inflammation of the urethra;
• deterioration of the function of the excrement organ of the digestive system;
• cardiovascular pathologies;
• The risk of blood clots.

To operate the device

In order to keep the device as long as possible, you need separate care.Given that manipulations are carried out in an intimate place that requires careful adherence to personal hygiene rules, the pump must be treated with antibacterial solutions.

Before use, we recommend washing the vacuum pump with warm water and soap and treated with all components with antiseptic.After the procedure, this invention is again sterilized, wiped and stored in a clean, dry place.

How to do it yourself?

The device can be useful not only to increase the size of a person's genital or healing therapy.

The pump can be made from improvised devices stored in the garage or chamber.

From the cuff pump

Before you start production, you need to prepare all parts and tools that can be useful for use.The vacuum pump is usually made of a car or a bicycle cuff pump.This is the simplest and most reliable method.

First you need to bring the opposite effect of the pump so that it does not deliver the air, but on the contrary, pull it out.To perform such an effect, you need to relax the pump, rotate the cuff with the back, and then assemble the device.This creates a vacuum environment.

Then install the check valve to drain the excess air.The valve of the Aquarium compressor is suitable for this.The pump is installed in a hose to prevent air from penetrating the pump.For greater effect, we recommend that you complete the closure.

This method is the simplest and is designed to create a shallow vacuum environment.The power is up to 80% breath pump.If you need to make a stronger pump, you can use a household compressor.

Use a medical syringe

We make a vacuum pump from a regular medical syringe.This will require the following materials:

• plastic t -shirt;
• a plastic tube that coincides with the diameter of the holes of the T -shirt and the syringe;
• two valves from the aquarium compressor;
• The syringe (the power of the future device depends on its size).

Three of the plastic tube should be cut 10 cm and then secured to the T -shirt.The joints should be hermetic and well -fixed so that they do not jump out when pressure occurs.You need to get the three mocking t -shirts.

One that is located in the middle is attached to the syringe's nose.At the remaining two ends, the valves must be installed and one should be opened and the other inward.In order to avoid disturbing, arrows are usually placed on aquarium valves, indicating the direction of air movement.

Such a syringe can pump fluid from one container to another.

To perform the procedure, a valve is lowered into the liquid with a valve and the second is in an empty container that must be filled.The pump is folded with a piston.